DrainLift SANI-XL.17/T540/4-CEE
| Hydraulic data | |
|---|---|
| Maximum operating pressure PN | 4 bar |
| Min. fluid temperature Tmin | 3 °C |
| Max. fluid temperature Tmax | 40 °C |
| Min. ambient temperature Tmin | 3 °C |
| Max. ambient temperature Tmax | 40 °C |
| Max. fluid temperature, for short periods up to 5 min. T | 65 °C |
| Sound-pressure level | 70 |
| Useable volume at 250 mm inlet height V | 162 l |
| Useable volume at 315 mm inlet height V | 196 l |
| Useable volume at 560 mm inlet height V | 300 l |
| Macerator | no |
| Motor data | |
|---|---|
| Mains connection | 3~400 V, 50 Hz |
| Rated current IN | 5,5 A |
| Protection class | IP68 |
| Phase | 3 |
| Rated speed n | 2848 1/min |
| Number of poles | 2 |
| Activation type | Direct On Line (DOL) |
| Max. switching frequency t | 60 1/h |
| Power consumption P1(Q=max.) of selected impeller * number of pumps P1 | 3200 W |
| Operating mode per pump | S1 |
| Insulation class | F |
| Materials | |
|---|---|
| Pump housing | PP-GF30 |
| Impeller | Stainless steel |
| Shaft | Stainless steel |
| Motor housing | Stainless steel |
| Installation dimensions | |
|---|---|
| Diagonal dimension Diagonal axis | 1230 mm |
| Inlet connection | - |
| Pipe connection on the discharge side DNd | DN 80 |
| Connection venting | DN 75 (75 mm) |
| Connection for drainage pipe | DN 50 (50 mm) |
DrainLift SANI-XL.12 .../XL.16 .../XL.21 ...
| Product data | |
|---|---|
| Brand | Wilo |
| Product description | DrainLift SANI-XL.17/T540/4-CEE |
| Article number | 6098885 |
| EAN number | 4062679440675 |
| Colour | black/silver |
| Minimum order quantity | 1 |
| Date of sales availability | 2024-01-01 |
| Previous model article number | 2549945 |
| Previous model designation | DrainLift SANI-XL.17T/4 |
| Packaging | |
|---|---|
| Packaging type | Cardboard box |
| Packaging property | Transport packaging |
| Pieces per pallet | 1 |
| Number per layer | 1 |
| Dimension, weight | |
|---|---|
| Length with packaging | 1030 mm |
| Length L | 1025 mm |
| Height with packaging | 980 mm |
| Height H | 840 mm |
| Width with packaging | 900 mm |
| Width W | 877 mm |
| Gross weight, approx. m | 121 kg |
| Net weight, approx. m | 93 kg |
Ready for connection and fully submersible double pump lifting unit for pumping sewage containing faeces.
Fluid
For the collection and pumping of these fluids in commercial areas:
- Sewage with faeces
- Sewage without faeces
Sewage pumping according to 12050
The lifting unit follows DIN EN 12050-1.
Construction
Gas- and watertight collection tank:
- Sloped floor at an angle
- Inspection opening with transparent cover
- Freely selectable inlets in the shown areas
- Level measurement with a level sensor 4 ... 20 mA
Sewage pump:
- Mounted directly on the collection tank
- Self-cooling motor (sheath flow cooling) with thermal motor monitoring
- Discharge port with non-return valve including inspection opening attached
Pre-wired switchgear for automatic operation:
- Operation through display and icon-based, alphanumeric menu
- Collective fault signal with potential-free contact
- Individual fault signal with potential-free contact
- ModBus interface
- Integrated and mains-independent alarm
- Adjustable follow-up time
- 1.5 m connection cable with attached plug
Scope of delivery
- Lifting unit with switchgear and connection cable with plug
- Flange connector from DN 80, PN 10 to DN/OD 110
- Flexible collar DN/OD 110 for discharge connection
- HT double socket DN/OD 75 for ventilation connection
- HT double socket DN/OD 50 for drain connection
- Inlet set with hole saw 175 mm (7 in) and seal DN/OD 160
- Floor fixation set
- 9 V rechargeable battery
- Installation and operating instructions
| Operating Data |
|---|
| Approved field of application | |
|---|---|
| Fluid temperature T | 3 °C |
| Max. fluid temperature, for short periods up to 5 min. T | 65 °C |
| Ambient temperature T | 3 °C |
| Maximum operating pressure PN | 4 bar |
| Max. permissible pressure in the pressure pipe P | 1,5 bar |
| Product data | |
|---|---|
| Gross volume of the tank V | 372 l |
| Useable volume at 250 mm inlet height V | 162 l |
| Useable volume at 315 mm inlet height V | 196 l |
| Useable volume at 560 mm inlet height V | 300 l |
| Sound-pressure level | 70 |
| Operating mode (non-immersed) | S1 |
| Height H | 840 mm |
| Length L | 1025 mm |
| Width W | 877 mm |
| Diagonal dimension Diagonal axis | 1230 mm |
| Free ball passage of the hydraulics | 65 mm |
| Motor data | |
|---|---|
| Mains connection | 3~400 V, 50 Hz |
| Voltage tolerance | ±10 % |
| Rated power P2 | 2,5 kW |
| Rated speed n | 2848 1/min |
| Rated current IN | 5,5 A |
| Insulation class | F |
| Protection class motor | IP68 |
| Activation type | Direct On Line (DOL) |
| Max. switching frequency t | 60 1/h |
| Motor protection | Bimetall |
| Cable | |
|---|---|
| Connection cable length L | 10 m |
| Cable type | H07RN-F |
| Cable cross-section | 6G1 mm² |
| Mains plug | CEE 32A, 3P+N+PE, 6h |
| Materials | |
|---|---|
| Tank | PE |
| Pump housing | PP-GF30 |
| Impeller | Stainless steel |
| Shaft | Stainless steel |
| Gasket material | NBR |
| Motor housing | Stainless steel |
| Installation dimensions | |
|---|---|
| Pipe connection on the suction side | DN 110 (110 mm) |
| Pipe connection on the discharge side | DN 80 |
| Connection venting | DN 75 (75 mm) |
| Ordering information | |
|---|---|
| Brand | Wilo |
| Product description | DrainLift SANI-XL.17/T540/4-CEE |
| Net weight, approx. m | 93 kg |
| Article number | 6098885 |
Installation and operating instructions
Wilo-Control EC-L
| Article Number | 2543252 |
| Edition | 2022-09 |
| Number of pages | 64 |
| Language | en |
PDF (8 MB)Wilo-DrainLift SANI-XL
| Article Number | 2552855 |
| Edition | 2024-12 |
| Number of pages | 28 |
| Language | en |
PDF (6 MB)Installation and operating instructions (digital)
Wilo-Control EC-L
| Article Number | 2543252 |
| Edition | 2022-09 |
| Language | bg, cs, da, de, el, en, es, et, fi, fr, hr, hu, it, lt, lv, mk, nl, no, pl, pt, ro, ru, sk, sl, sr, sv, tr, uk, zh |
HTML (223 MB)Operating instructions (digital)
Wilo-DrainLift SANI-XL
| Article Number | 2552855\\n2552855\\n |
| Edition | 2024-12 |
| Language | cs, de, el, en, es, fr, hu, it, nl, no, pl, ro, sv, tr, uk, zh |
HTML (114 MB)Certification booklet
Wilo-DrainLift SANI
| Article Number | 6088777 |
| Edition | 2020-06 |
| Number of pages | 40 |
| Language | language neutral |
PDF (2 MB)Group Statement
Group Statement REACH
| Edition | 2021-05 |
| Number of pages | 5 |
| Language | language neutral |
PDF (271 KB)Fittings (1) | |||
Shut-off ball cock for switching between 2 circuits:
| |||
Installation/setup (11) | |||
Diaphragm hand pump for manual draining of a collection reservoir. Fixed installation and mobile application possible. The pumped-off fluid must flow directly to the discharge pipe or another collection point. | |||
Lip seal for sealing inlets with a pipe diameter of 40 mm. | |||
DN 40 inlet seal | 6096499 | ||
Lip seal for sealing inlets with a pipe diameter of 50 mm. | |||
DN 100 inlet seal | 2522672 | ||
Lip seal for sealing inlets with a pipe diameter of 110 mm. | |||
DN 150 inlet seal | 2552849 | ||
Lip seal for sealing inlets with a pipe diameter of 160 mm. | |||
DN 200 inlet seal | 2552850 | ||
Lip seal for sealing inlets with a pipe diameter of 225 mm. | |||
DN 32 inlet seal kit | 6096492 | ||
Inlet kit for sealing inlets, consisting of:
| |||
DN 40 inlet seal kit | 6096493 | ||
Inlet kit for sealing inlets, consisting of:
| |||
DN 100 inlet seal kit | 2521841 | ||
Inlet kit for sealing inlets, consisting of:
| |||
DN 150 inlet seal kit | 2515145 | ||
Inlet kit for sealing inlets, consisting of:
| |||
Inlet kit for sealing inlets, consisting of:
| |||
Pipes/pipe joints (3) | |||
Flange connectors for flexible connection (max. adjustment 130 mm) of free pipes without flanges to pipes with flanges. Incl. hose, hose clips and mounting accessories. | |||
Flange connector DN 100 | 2511597 | ||
Flange connectors for flexible connection (max. adjustment 130 mm) of free pipes without flanges to pipes with flanges. Incl. hose, hose clips and mounting accessories. | |||
Flange connectors for flexible connection (max. adjustment 130 mm) of free pipes without flanges to pipes with flanges. Incl. hose, hose clips and mounting accessories. | |||
Alarm signal (8) | |||
Mains-independent alarm switchgear (self-charging power supply unit) for wall fixation with optical and acoustic alarm signal. Inputs:
Outputs:
Scope of delivery:
Attention: Signal transmitter is to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within hazardous areas must be connected through an intrinsically safe electric circuit, e.g. breakdown barrier or ex-rated cut-off relay. | |||
Alarm switchgear for wall fixation with optical and acoustic alarm signal. Inputs:
Outputs:
Scope of delivery:
Attention: Signal transmitter is to be provided on-site. Switchgears are not protected against explosions and may only be used outside potentially explosive atmospheres. Signal transmitters within hazardous areas must be connected through an intrinsically safe electric circuit, e.g. breakdown barrier or ex-rated cut-off relay. | |||
Xenon flash light for indoor and outdoor areas for installing on the switch cabinet. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
24 VDC flash light, wall fixation | 2551612 | ||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz Notice: The signal lamp can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (92 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA). Notice: The signal horn can be connected to a potential-free contact (SSM/ESM) on the switchgear. The power supply must be provided by the customer! | |||
Network-independent small alarm switchgear in ISO plug housing with shock-proof plug, acoustic alarm signal (65 dBA) and attached electrode with 3 m cable for level measurement. Attention: Switchgear and signal transmitter are not protected against explosions and may be used only outside potentially explosive areas! | |||
Level control (9) | |||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 with 10 m cable | 503211893 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 with 20 m cable | 2004431 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 with 30 m cable | 2004432 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA KR1 S with 5 m cable | 6082806 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA KR1 S with 10 m cable | 6082807 | ||
As a signal transmitter for the system switching, depending on the level of an open container or a cistern. Switching points: up ON / down OFF | |||
Float switch WA65 (PSN-X) with 20 m cable | 6088843 | ||
As a signal transmitter for the system switching, depending on the fill level of an open tank or a cistern. Switching points: up ON/down OFF with switching contacts NO/COM/NC | |||
Float switch WA65 (PSN-X) with 10 m cable | 6088844 | ||
As a signal transmitter for the system switching, depending on the fill level of an open tank or a cistern. Switching points: up ON/down OFF with switching contacts NO/COM/NC | |||
As a signal transmitter for the system switching, depending on the fill level of an open tank or a cistern. Switching points: up ON/down OFF with switching contacts NO/COM/NC | |||
With Wilo as your partner, you can not only be sure of choosing high-quality product solutions, but also of benefiting from a comprehensive, worry-free package of well thought-out services. We collaborate to develop a service concept tailored to your individual needs; with our expertise and personal consultancy, we make sure that the operation of your systems is as energy-efficient, reliable and economical as possible. All the while our competent Wilo service technicians are ready to assist you with fast, reliable and on-time support.
Recommended services | |||
 Maintenance | Maintenance BASIC Lifting stations (Double pump) | 2219542 | |
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request. | |||
Maintenance COMFORT Lifting stations (Double pump) | 2219516 | ||
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request. | |||
Maintenance PREMIUM Lifting stations (Double pump) | 2219569 | ||
In order to ensure and guarantee operational reliability of the pumps/systems, it is recommended to have regular and DIN-compliant inspections and maintenance carried out by the works' own WILO SE Customer Service Department. The tasks are carried out in accordance with DIN 31051 / DIN EN 13306. The tasks comprise the following points:
Scheduling and organisation is performed by WILO. Other individual maintenance offers are possible on request. | |||
 Commissioning | Commissioning Lifting stations (Double pump) | 2219413 | |
For perfect functioning of the pump(s) / system(s), it is recommended to have the commissioning carried out by the works' own WILO SE Customer Service Department. Optimum setting and efficient operation of the system are ensured as a result. Commissioning is comprised of the following points:
The price for commissioning only applies to system(s) which have been installed in accordance with the installation and operating instructions and state-of-the-art technology. No costs for any materials which may be required are included. | |||